Schematic

Show filter
ImageImage

Small schematic tip if you're going to use PoE in your devices related to the minimum load.

867
ImageImage

Important note about standard 4-pin PC fan when using PWM signal to control it.

1.05K
ImageImage

Small thing, that could damage your devices and should be taken into account when using isolated DC-DC modules.

1.34K

Image

How to deal with addressable RGB LED (like WS2812B) when you have only 3.3V rail?

3.54K

Image

It's logical to just connect PHY to Ethernet switch using RJ45 Cat cable, but for real schematic you will want to use optimized solution without additional isolation transformer.

2.40K
ImageImage

Demonstration of the Power Good (PG) pin working of DC-DC converter and where it could be useful

2.63K
ImageImage
Category:DC-DC Converters, Buck-Boost, Low Power Consumption
Severity:๐ŸŸฅ High
Resolution:๐Ÿ“Ÿ Hardware
Description:When you have battery powered device with low power consumption the device current during standby should be as small as possible, so in this article you will see how important to have low quiescent current of DC-DC converter.
1.82K
ImageImage

Using new reference designator styles (U1 -> U1501) with page numbers to improve readability and modularity of the schematic sheets.

1.07K
Cookies?